Plastic Ski Binding Hole Plugs

If you're remounting bindings, or mounting new bindings on old skis, use these plastic hole plugs to fill old binding screw holes you won't be reusing They'll keep out water that can otherwise freeze, expand and possibly create structural damage. Just squirt in a dab of binding or similar waterproof glue, and tap one of these plugs into the empty hole with a hammer. When the glue dries, carefully trim off any protruding plug material with a chisel or razor blade.

• Available in a rainbow of colors.
• 4.7mm diameter tapering to a point.
• 10mm long
• Sold as a bag of 20 plugs.

Tips:

• If your holes are really stripped out you might want to pick up some larger diameter wood plugs.
• Give the plastic plugs one good whack with the hammer to set them, they will mushroom out most likely, that is ok, just trim off the excess.
• If you need to reuse a plugged hole in the future, no problem, just drill right through the plug with the appropriate drill bit.