Created with Sketch. Created with Sketch.

Shop by Category

Wintersteiger

  • #3 POZIDRIVE BIT- 2.75' LENGTH

    #3 Pozidriv® Bits

    These stout #3 pozidriv® bits are designed to fit into electric drills. We recommend final tightening of all binding screws be done by hand to reduce the risk of stripping. Offered in two...

    $8.95 - $12.95
    Choose Options
  • Adjustable Depth 8mm Drill Bit

    If you have a stripped out binding hole on your ski often the best solution is to install a plastic or a brass insert. This tool creates the proper diameter hole at the correct depth. It includes an...

    $29.95
    Add to Cart
  • Tap for Ski Binding Mounting

    Alpine Ski Binding Mounting Tap

    Some skis are made with a metal sheet inside, or have a hard insert in the core, these skis generally require you tap the screw holes prior to mounting bindings. This tap has a thread pitch that...

    $21.95
    Add to Cart
  • Aluminum Oxide Pocket Stone

    Aluminum Oxide Deburring Stone

    This aluminum oxide stone is a good general use stone to have on your bench. It quickly removes burrs and imperfections from edges, can be used to lap scrapers, sharpen pocket knives, etc. Not...

    $6.95
    Add to Cart
  • Binding Hole Insert (Brass)

    Stripped binding holes happen, when you encounter one deal with it ASAP.  If the hole is not too enlarged you can cut up some steel wool and mix it into a batch of epoxy, insert the mix into the...

    $1.00
    Add to Cart
  • Brass Ski Binding Insert

    Binding Hole Insert Screw-In (Brass)

    These special brass inserts are intended to repair badly damaged screw holes. They are designed to be screwed into an 8mm hole. The aggressive threads on the outside of the insert bite into the ski...

    $1.00
    Add to Cart
  • EPOXY PIGMENT FOR SKI BASE REPAIR -BLACK, BLUE, RED, YELLOW AND WHITE

    Epoxy Pigment

    Mix these color pigments with epoxy or urethane to match the color of topskins, sidewalls, etc. on your skis or snowboard.  You can also intermix pigments to create different colors...

    $8.95
    Choose Options
  • EPOXY & GLUE SYRINGE

    Epoxy Syringe 10ml

    This 10ml plastic syringe is a handy tool for injecting epoxy or glue deep into delaminations or binding holes.  We find it best to pre-warm the epoxy prior to filling the syringe, this...

    $1.95
    Add to Cart
  • Included with Ergo Sidewall Planer

    Ergo Sidewall Planer

    ERGO SIDEWALL PLANER Heftier, with a more ergonomicly-shaped body than the FK model. Includes a round cutting blade. An Optional square carbide cutting blade is also available...

    $49.95
    Add to Cart
  • File Cleaning Card & Brush .

    Double sided file cleaner, one side of the wooden handle has a file cleaning brush, the other has a nice thick nylon brush. A file gets dirty fast when sharpening edges.  This not only...

    $12.95
    Add to Cart
  • High Peel Epoxy

    3.5 gram single use packet of epoxy appropriate for ski mounting screws or threaded insert installation (not for threadlocking metric mounting screws). This is a general purpose epoxy selected for...

    $2.95
    Add to Cart
  • Hollow Core Drill Bit

    If you're eyeballing this drill bit things have probably gone a bit south! Hopefully this clever tool will solve your problem. Designed to remove broken binding screws and a bit of the surrounding...

    $29.95
    Add to Cart
  • Multiguage Binding Drill Bit

    This is a multiguage ski mounting drill bit, starting at 3.3mm and stepping up to 4.1mm. Depth is 11mm. 3.3/4.1mm x 11mm Robust lip stops bit at the appropriate depth (11mm). Diameter fits...

    $26.95
    Add to Cart
  • Nordic Binding Drill Bit

    This drill bit is specially designed for mounting Nordic ski bindings, it has a greater depth than most common alpine drill bits. It ensures the holes are drilled at the correct diameter, and perhaps...

    $14.95
    Add to Cart
  • Nordic Ski Binding Screw

    Nordic Binding Screw

    Lose a screw for your Nordic bindings? These are Nordic specific screws, meaning the thread pitch and head profile are unique to many Nordic bindings. If you're looking to mount an old pair of 3-pins...

    $0.50
    Add to Cart
  • Base p-tex repair string for gouges in ski & snowboard repair

    P-Tex Repair String - 10'

    This repair string works better than traditional drip repair candles when filling base gouges for several reasons. First, it's made of harder and more durable polyethylene, so your repair jobs...

    $6.95
    Choose Options
  • Black Ski Base Repair Material Clear Ski Base Repair Material

    P-Tex Ski Base Patch Material

    These sheets of sintered p-tex are glued (not melted) to repair very large gouges or damaged areas.  The material is 4.25" (110mm) wide and 1mm thick. They are sold in 12-inch increments in...

    $8.95
    Choose Options
  • Plastic Binding Hole Insert

    Plastic Ski Binding Hole Inserts

    Stripped binding holes happen, when you encounter one deal with it ASAP.  If the hole is not too enlarged you can cut up some steel wool and mix it into a batch of epoxy, insert the mix into the...

    $0.50
    Add to Cart
  • Plastic Hole Plugs for Ski Mounting

    Plastic Ski Binding Hole Plugs

    If you're remounting bindings, or mounting new bindings on old skis, use these plastic hole plugs to fill old binding screw holes you won't be reusing They'll keep out water that can otherwise...

    $2.50
    Choose Options
  • Ski Edge Repair Screws

    These tiny Philips head screws are used to attach replacement steel edge sections to damaged skis or snowboards.  Use a Phillips Head #1 driver to install. They're sold in bags of 20.

    $3.95
    Add to Cart
  • 10mm 12mm

    Snowboard Binding Screws (Roundhead)

    These screws are for use on snowboard bindings with a base plate that does not require a recessed bolt head. The screws are 6mm in diameter, standard for snowboard inserts. We also offer flat washers...

    $0.10 - $0.50
    Choose Options
  • Inserts sold separately.

    Snowboard Insert Drill Bit

    This drill bit is required for installation of plastic capped snowboard inserts.  Requires first drilling a pilot hole to guide the bit with a 5/16" (8mm) drill bit (not included)...

    $64.95
    Add to Cart
  • Snowboard Insert Tap

    Snowboard Insert Repair Tap

    This 6 x 1mm tap is used for tapping or cleaning damaged machine threads in snowboard inserts. It has four flutes and is a "bottom" tap, which means the tip is not pointed so it will tap to...

    $19.95
    Add to Cart
  • Torx® Driver Bit T20

    Torx® Driver Bit T20

    Give your paws a break, use this bit to get all those pesky binding screws started. To avoid the risk of stripping out a screw we recommend setting the choke on your drill as low as you can, and...

    $14.95
    Add to Cart
  • Torx® Driver Bit T25

    Torx® Driver Bit T25

    Give your paws a break, use this bit to get all those pesky binding screws started. To avoid the risk of stripping out a screw we recommend setting the choke on your drill as low as you can, and...

    $15.95
    Add to Cart
  • SALE

    Wintersteiger Discman 87° Angle Wheel

    Optional 87° fixed-angle wheel for Wintersteiger Discman tuner. This replaces the adjustable angle guide the Discman ships with. Unlike the stock angle guide, this fixed-angle wheel rolls on...

    Was: $34.95
    Now: $24.95
    Add to Cart
  • SALE

    Wintersteiger Discman 88° Angle Wheel

    Optional 88° fixed-angle wheel for Wintersteiger Discman tuner. This replaces the adjustable angle guide the Discman ships with. Unlike the stock angle guide, this fixed-angle wheel rolls on...

    Was: $34.95
    Now: $24.95
    Add to Cart
  • Blacklight True Bar 6" (150mm) .

    An easy to use and durable true bar for determining base flatness and base edge bevel. Round shape ensures a drop to the floor won't render it useless. Matte black finish makes sighting easier...

    $12.95
    Add to Cart
  • Felt Tongue Pads Felt Tongue Pad Dimensions

    Boot Fitting Felt Tongue Pads (pr)

    No, don't use these puppies to check for sore tonsils...instead, stick 'em to the inside of boot tongues to add a bit of cushion to bone irregularities.  Used primarily for smaller problem...

    $4.95
    Add to Cart
  • Ski Boot Foam L-Pads Ski Boot Foam L-Pad Diagram

    Boot Fitting Foam L-Pads (2 pr)

    Use L-pads to fill the void between the Achilles tendon and ankle bone.  They can create better security and heel hold-down.  They are self-adhesive and can be sanded or trimmed to fit...

    $5.95
    Add to Cart