Product Overview
If you're remounting bindings, or mounting new bindings on old skis, use these plastic hole plugs to fill old binding screw holes you won't be reusing They'll keep out water that can otherwise freeze, expand and possibly create structural damage. Just squirt in a dab of binding or similar waterproof glue, and tap one of these plugs into the empty hole with a hammer. When the glue dries, carefully trim off any protruding plug material with a chisel or razor blade.
- Available in a rainbow of colors.
- 4.7mm diameter tapering to a point.
- 10mm long
- Sold as a bag of 20 plugs.
Tips:
- If your holes are really stripped out you might want to pick up some larger diameter wood plugs.
- Give the plastic plugs one good whack with the hammer to set them, they will mushroom out most likely, that is ok, just trim off the excess.
- If you need to reuse a plugged hole in the future, no problem, just drill right through the plug with the appropriate drill bit.
Reviews
21 Reviews Hide Reviews Show Reviews
-
5 Hole plugs
Posted by Terry Hilton on Jan 26, 2021
Work as designed, nice to be able purchase small quantities instead of bulk quantities
-
5 Ski binding hole plogs
Posted by Phil on Jan 03, 2021
I used these plugs on skis that I stripped to use to make adirondack ski chairs. They can be heated to fully plug holes and are easily trimmed flush with a razor. Fast delivery service totally satisfied.
-
5 Works well
Posted by Steven K. on Oct 18, 2020
Was able to seal up screw holes from old bindings by hammering them in until they wouldn't go any more and then trimming off the excess.
-
5 Product works and Great Customer Service
Posted by Laura P. on Aug 14, 2020
Not only did the product meet my expectations but the customer service was great! The package my first order was in was ripped and the product was lost. I contacted Tognar and received a timely response and a new order was sent right away. Thank you!!
-
5 As expected
Posted by Ryan on Apr 10, 2020
What was most impressive was how fast i got the hole plugs in the mail. The order was correct and the quality of the plugs was appropriate. Depending on the ski, i had to shorten some of the plugs, but it was easily done with pliers and the product worked as expected.
-
4 Good
Posted by Brian on Apr 12, 2019
They work. May need to trim down or remove excess after placement (I used a dremel with sander bit after gluing).
-
5 Great Product
Posted by Jared on Apr 13, 2018
If you're in the market for used skis, or if you are changing over to new bindings, these are a very handy product to have around. Work as advertised, easy to hammer in and trim off the excess.
-
3 Good plugs
Posted by Andrew A on Oct 27, 2016
Plugs work OK. They are sized for 4.1mm holes and need trimming to fit into a 3.8mm hole. Made of a softer than expected plastic that deforms easily if you try to force it into a hole. Will probably go back to using golf tees as they are easier to work with.
-
4 plugs
Posted by Andy on Jan 15, 2015
Work fine. Wish they came in more colors.
