Mounting Drill Bits for Ski Bindings

(21 reviews) Write a Review
SPK 100300

Product Overview

These drill bits are specially designed for mounting ski bindings. They ensure the holes are drilled at the correct diameter, and perhaps more the correct depth. They fit any mounting jig, are a full 3" long, and will countersink the screw holes so you don't "bubble-up" the top ski surface when you tighten down the screw. The bits feature a pronounced lip which prevents the bit from drilling any deeper than it should. Bits are sold each.

  • FOUR OPTIONS AVAILABLE (first number indicates diameter, second indicates depth)
  • 3.6 x 9mm bit is best for most adult alpine skis without metal in the ski.
  • 4.1 x 9mm bit is for alpine skis with a metal or titanal mounting plate internally located in the ski.
  • 3.5 x 7mm bit is for junior alpine skis.
  • Sold Each


(21 reviews) Write a Review

21 Reviews Hide Reviews Show Reviews

  • 5
    Product is a precision item, perfect depth and drill positive results. Really also enjoy all the helpful Tech Tips!

    Posted by Peter Beringer on Jan 22, 2020

    Product is a precision item, perfect depth and diameter. Positive results!

  • 5
    Ease of use.

    Posted by Charles Healer on Oct 02, 2019

    Great for drilling skis for bindings. Drills fine and stop keeps from drilling too deep.

  • 5
    Right tool for the job

    Posted by Brian on Apr 12, 2019

    Does what it's supposed to do

  • 5
    Drill bit

    Posted by Dave on Feb 15, 2019

    Works great! The step keeps you from drilling too deep and helps you have a clean flat surface to mount to.

  • 5
    Works perfect with Jigarex drill guide block

    Posted by Mike Zahnt on Nov 08, 2018

    Must have for mounting plates and bindings

  • 5
    alpine binding drill bit

    Posted by ski binding tyro on May 23, 2018

    My first occasion to mount alpine bindings, so I thought I should get the proper, albeit expensive, drill bit, but much cheaper than the $50.00 the ski shop wanted to mount the bindings. The bit worked well with no damage to the ski. Remember to use the 4.1mm size rather than 3.5mm if the ski has a carbon or other metal laminate.

  • 4
    Great bits, rust easy though

    Posted by Raz on Mar 07, 2018

    Great bits, obviously must-have for mounting plates and bindings, but they do rust easily, compared to other bits.

  • 5
    Great bit!

    Posted by John on Mar 06, 2016

    I received a Wintersteiger branded bit. High quality tool steel, nice stuff.

  • 5
    Right tool for the job

    Posted by Unknown on Mar 20, 2015

    Mounted bindings for the first time and this bit made it hassle free (apart from the measuring). I used the 4.1mm variant for skis with metal topsheets. Drilled cleanly through the metal, which I then tapped with another little tool from Tognar. Definitely use a nail or punch to make an indent where you intend to drill so that the bit doesn't wander.