Mounting Drill Bits for Ski Bindings

(21 reviews) Write a Review
SPK 100300

Product Overview

These drill bits are specially designed for mounting ski bindings. They ensure the holes are drilled at the correct diameter, and perhaps more the correct depth. They fit any mounting jig, are a full 3" long, and will countersink the screw holes so you don't "bubble-up" the top ski surface when you tighten down the screw. The bits feature a pronounced lip which prevents the bit from drilling any deeper than it should. Bits are sold each.

  • FOUR OPTIONS AVAILABLE (first number indicates diameter, second indicates depth)
  • 3.6 x 9mm bit is best for most adult alpine skis without metal in the ski.
  • 4.1 x 9mm bit is for alpine skis with a metal or titanal mounting plate internally located in the ski.
  • 3.5 x 7mm bit is for junior alpine skis.
  • Sold Each


(21 reviews) Write a Review

21 Reviews Hide Reviews Show Reviews

  • 5
    Makes quick work of mounting an AT Binding

    Posted by Jim Murtha on Mar 12, 2015

    Besides being quick it also is really easy to be very accurate and dead-on. I used it with Tyrol Ambition 12 bindings on Ramp Skis.

  • 5
    Well worth it

    Posted by Joshua on Dec 26, 2014

    First time mounting bindings for me, and this bit made it easy, not having to worry about drilling to deep.Did great for my tele bindings

  • 5
    Makes life a lot easier!

    Posted by Sean on Dec 17, 2014

    Using this bit saved me heaps of time on my last mount. Should have gotten one of these sooner.

  • 5
    You need one...stop kidding yourself.

    Posted by Jeff Knieser on Nov 23, 2014

    Why the heck didn't I get one of these years ago? Great product. The stress-reduction alone is well worth the price of the bit.

  • 5
    Excellent quality and precise fit in a jig

    Posted by Russell Reid on Aug 20, 2014

    Very good results with nordic bindings. It is hard to do without these if you use a jig.

  • 4
    Very simple to use with integrated stop

    Posted by Jon on Apr 11, 2014

    Mounted a pair of telemark bindings with these bits and they were very easy to use with an electric drill (freehand). I've since bought a drill guide to make it a little easier to drill perpendicular holes rather than reading the level as I'm drilling. On my Blizzard Bushwackers it took more effort than I was expecting to get through the metal topsheet in the binding area with the 4.1 drill bit, doesn't seem very sharp or I need to adjust my drilling speed some more. Once I got through the metal layer it went through the wood core very easily.

  • 5
    Makes drilling for bindings easy

    Posted by Unknown on Jan 02, 2014

    Not that it is horribly hard to limit depth while drilling a hole, these bits make it incredibly easy. Just punch down with a drill press until the flats contact the ski surface.

  • 5
    Perfect tool for the job

    Posted by Unknown on Jul 07, 2013

    Depth and diameter are spot on every time. Sharp bit for precise holes.

  • 5
    must have for mounting bindings

    Posted by trevhome on Apr 24, 2013

    why mess around? This bit takes the work out of mounting bindings. Gets the right depth and lasts