These drill bits are specially designed for mounting ski bindings. They ensure the holes are drilled at the correct diameter, and perhaps more importantly...at the correct depth. They fit any mounting jig, are a full 3" long, and will countersink the screw holes so you don't "bubble-up" the top ski surface when you tighten down the screw. The bits feature a pronounced lip which prevents the bit from drilling any deeper than it should. Bits are sold each.
- FOUR OPTIONS AVAILABLE (first number indicates diameter, second indicates depth)
- 3.6 x 9mm bit is best for most adult alpine skis without metal in the ski.
- 4.1 x 9mm bit is for alpine skis with a metal or titanal mounting plate internally located in the ski.
- 3.5 x 7mm bit is for junior alpine skis.
- Sold Each
23 Reviews Hide Reviews Show Reviews
The wasn’t my first stop to buy this bit, but they hold stock when the rest of the US didn’t. There is something to be said for that. The bit is nice too.
These bits are fantastic precision tools. Ordered both the 7 and 9mm bits. Cleanest mounting I have done in a decade. cm
Product is a precision item, perfect depth and diameter. Positive results!
Great for drilling skis for bindings. Drills fine and stop keeps from drilling too deep.
Does what it's supposed to do
Works great! The step keeps you from drilling too deep and helps you have a clean flat surface to mount to.
Must have for mounting plates and bindings
My first occasion to mount alpine bindings, so I thought I should get the proper, albeit expensive, drill bit, but much cheaper than the $50.00 the ski shop wanted to mount the bindings. The bit worked well with no damage to the ski. Remember to use the 4.1mm size rather than 3.5mm if the ski has a carbon or other metal laminate.
Great bits, obviously must-have for mounting plates and bindings, but they do rust easily, compared to other bits.