When a binding screw pulls clear out of a ski, the hole is stripped and needs repair. One of the cheapest and simplest solutions is to fill it with fast-setting epoxy and tap one of these wooden plugs in as far as is comfortable. Let it sit for 15 minutes or longer, then trim or chisel off any excess plug material that protrudes above the top sheet. Now you can re-drill the hole with a 3.6mm bit and reinstall the binding screw.
- Do not use for multiple holes in alpine skis, the repair is strong but not that strong. If in doubt use a brass insert of Helicoil.
- Sold in Bags of 10