Default Currency
Australia
New Zealand
European Union
Canadian Dollar
Product Description
Use this glue when installing binding screws on skis. It is a flexible, water resistant acrylic adhesive designed to bond porous material to non porous material.
- Setting time: 4 hours @ 70°F
- Work time: 20 minutes
- Impermeable to water when dry.
- Keeps water out of your core and helps reduce vibration that can loosen screws over time.
- Non-toxic.
- 2oz (59.14ml) bottle.
Product Videos
Custom Field
Product Reviews
10 Reviews Hide Reviews Show Reviews
-
Roo Clear
Probably a fine product, but the label says: "protect from freezing" and I ordered mine in January. It was a brick when I got it from the mailbox. Did not use it for fear of unknown results. Tognar might mention this fact !
-
Glue seems to work well
The reason that I can not rate this a 5 is that the spout tends to clog and needs to be cleared before using AND the hole is a bit too large for the glue stream to enter a typical 3.5mm drilled hole. I got around this by working the glue into the hole with a toothpick, but a smaller hole would have made the job easier.
-
The review speaks for itself. Nevertheless, an excellent product.
Very good stuff. For setting screws in ski bindings, the setup time is slow enough to allow for correctIng mistakes (sets in 20-30 minutes). Also, I discovered from a search of materials for the repair of minor base damage (small areas up to the
-
Okay
Was a bit goopy- I only used it to fill old binding screw holes. Wasn't sure if I trusted this for the actual mount over the high-peel epoxy (for Tele bindings)
-
I assume it works
Not sure how you'll know if it doesn't work unless there is a catastrophic failure of the bindings. It has good consistency and seems to do the job.
-
glue review
easy to use. Ensures waterproof closure of tapped holes.
-
Great glue
Glue works very well and really helps seal the joint. Time will tell how it wears after one season. Working time and consistency is just right. Keep a paper clip handy to unplug tip of container.
-
Good stuff
Excellent product. Easy to use. Holds bindings securely regardless of ski core - foam, wood , etc. Also works well as an all-around glue.
-
BInding Glue for Skate Ski
Worked as advertised. Easy cleanup
