Created with Sketch. Created with Sketch.

Shop by Category

Files and Stones

  • Moonflex Diamond Stone - 100 Grit Moonflex Diamond Stone - 200 Grit

    Moonflex Diamond Stones for Edge Tuning (70mm)

    Moonflex stones boast a higher diamond count and concentration on their faces for greater durability, plus feature a unique spiral pattern that doesn't load with debris as fast as other diamond stones.  Diamond stones last a long time if kept...

    AUD $29.52
    Choose Options
  • Viiala Hard Chrome Mill Files 2nd Cut

    These quality files are hard chromed for longer life and better glide. They are 2nd cut files with 18 teeth/cm, and are well suited for all-around edge filing. With a Rockwell hardness of 67 they easily cut through edge material. Ski edges have...

    AUD $11.77 - AUD $19.16
    Choose Options
  • Tognar Gummi Stone .

    This small rubber abrasive stone is handy for erasing rust from edges, or gently "softening" sharp tip and tail edges where they lift up out of the snow.  Great for taking away excessive sharpness without removing too much material (so you can...

    AUD $8.81
    Add to Cart
  • DMT 4 inch Diamond Stones .

    DMT 4 inch Diamond Stones .

    These metal and plastic laminate 'stones' have industrial diamonds bonded to them.  DMT diamond stones last a long time if kept clean (use a brass brush and an abrasive cleaner, like Bon Ami®, rinse with water) Use with light pressure (a...

    AUD $29.52 - AUD $118.32
    Choose Options
  • DMT 2.75 ' BLUE DIAMOND STONE- COARSE DMT 2.75 ' REDDIAMOND STONE- MEDIUM

    DMT 2.75 inch Diamond Stones .

    These metal and plastic laminate 'stones' have industrial diamonds bonded to them.  DMT diamond stones last a long time if kept clean (we use an old toothbrush with wax remover or Ronson lighter fluid for this) Use with light pressure (a heavy...

    AUD $14.73 - AUD $38.40
    Choose Options
  • VALLORBE ICECUT FILE

    Vallorbe Ice Cut Files

    Some technicians prefer this unique tangeless file, especially when using them in conjunction with base and side-edge bevel guides.  They're made of high Rockwell hardness steel for excellent durability and are sized slightly shorter than...

    AUD $29.52 - AUD $41.36
    Choose Options
  • Mill File 2.75" (70mm)

    Hard chrome mill file. 2nd Cut File Fits many edge tuning tools including the MTK 701. Handy directional arrow lets you know which way the file needs to go in order to cut. 2.75" (70mm) long. Sold each.

    AUD $14.73
    Add to Cart
  • Brass Supertooth Brush

    This industrial grade brush features brass bristles for tough cleaning. Useful for cleaning steel filings, wax, p-tex and debris from hard-to-reach file inserts in bevel tools and from the teeth of mill files. Sold each.

    AUD $2.89
    Add to Cart
  • 100 Grit 200 Grit

    Swix Pro Racing Diamond Stones (100mm)

    Swix Racing Pro Racing Diamond Stones have a unique diamond pattern and high diamond count, the benifits are longer lasting, durable stones with amazing cutting and polishing characteristics. The diamond sheet is attached to an aluminum backing plate...

    AUD $47.28
    Choose Options
  • TOGNAR HARD ARKANSAS STONE- 3'

    Arkansas Stone - Hard

    The HARD Arkansas stone is good for all-around polishing, fine enough for 99.9% of tuners out there. We offer these premium Arkansas stones for the finest, most precise edge honing and finishing results.  Extracted from quarries in the Ouachita...

    AUD $14.73
    Add to Cart
  • Aluminum Oxide Pocket Stone

    Aluminum Oxide Deburring Stone

    This aluminum oxide stone is a good general use stone to have on your bench. It quickly removes burrs and imperfections from edges, can be used to lap scrapers, sharpen pocket knives, etc. Not really a polishing stone, you'd use it to knock down...

    AUD $10.29
    Add to Cart
  • Viiala Hard Chrome Mill Files 1st Cut

    These quality files are hard chromed for longer life and better glide. They are 1st cut files with 15 teeth/cm, and are well suited for removing edge material quickly, it is best to use them on side edges only, they are generally too aggressive for...

    AUD $16.20 - AUD $19.16
    Choose Options
  • File Cleaning Card & Brush .

    Double sided file cleaner, one side of the wooden handle has a file cleaning brush, the other has a nice thick nylon brush. A file gets dirty fast when sharpening edges.  This not only reduces cutting efficiency but leads to faster wear...

    AUD $19.16
    Add to Cart
  • Panzar File 300mm

    Panzar File (300mm)

    This very aggressive file has large curved teeth to remove excess P-Tex repair material very quickly. High quality and very sharp. They have endless uses around a ski shop and home in general. One of the meanest files out there! Use it with a light...

    AUD $44.32
    Add to Cart
  • Panzar File - 2.75" (70mm)

    Panzar File 2.75" (70mm)

    Panzar files are used to "rough in" side edge bevels on skis or snowboards. Follow with a mill file and polishing stone selection. Use on side edges only! They are too aggressive for base edges. Also useful for removing rock damage (be sure to use a...

    AUD $19.16
    Add to Cart
  • BASE & EDGE MAGNIFIER 5X

    Base & Edge Eye Loupe 5X

    5x ground-glass eye loupe. Inspect and evaluate the condition of base material and edges. Analyze base structure definition, the finish of steel edge surfaces, the presence of unwanted p-tex hairs or oxidation. Study snow crystals. Yields valuable...

    AUD $14.73
    Item is currently out of stock.
  • Nylon Supertooth Brush

    These industrial grade toothbrushes feature sturdy nylon bristles for all around cleaning.  Especially useful for cleaning steel filings, wax, p-tex and debris from hard-to-reach file inserts in bevel tools. Sold each.

    AUD $2.89
    Add to Cart
  • Swix Brass File Cleaning Brush

    Swix Brass File Cleaning Brush (T0177B) .

    This is one of the nicest file cleaning brushes we have used, a simple but essential tool. Smaller file cleaning brushes are quicker to use and can often be used while the file is still in the guide, if you are looking for a larger traditional file...

    AUD $8.81
    Add to Cart
  • Swix World Cup Racing Pro File 13tpi Swix World Cup Racing Pro File 17tpi

    Swix World Cup Racing Pro Files

    These single-sided, tang-less files are some of the sharpest and flatest we've come across. They are simply a joy to tune with! The 13t is a great choice for setting angles on new skis, or reestablishing the angle on worn edges, unlike a panzer this file...

    AUD $118.32
    Choose Options
  • Spyderco Ceramic Polishing Stone (Double Stuff)

    Spyderco Ceramic Polishing Stone (Double Stuff)

    This stone is double sided, featuring Spyderco's Medium and Fine ceramic stones bonded together. One side is a 600 grit stone, the other is 1200 grit. Slightly thicker than Spyderco's single stones, so check for fit in certain edging tools. As racers...

    AUD $48.10
    Add to Cart
  • Arkansas Stone - Translucent

    The TRANSLUCENT Arkansas stone is ultrafine for the ultimate edge polish. We offer these premium Arkansas stones for the finest, most precise edge honing and finishing results.  Extracted from quarries in the Ouachita Mountains of Arkansas...

    AUD $29.52
    Add to Cart
  • Diamond Stone for Swingcut Tool 325g

    325 Grit Diamond Stone for SKS 3000 Swingcut Tool

    20mm x 30mm diamond stone for SKS 3000 SwingCut Tool. 325 grit diamond stone. Use for deburring or polishing edges. Note this stone is the same blue color as the 600 grit. The 600 grit is marked with red paint on the reverse, the 325 grit is not...

    AUD $17.68
    Add to Cart
  • Toko Panzar File for Ski Tuning (100mm)

    This aggressive file is useful for setting side edge angles initially or bringing very dull or rounded edges back to life. It should only be used on the side edges, it is far too aggressive for base edges! It works best with side angle guides like the...

    AUD $17.68
    Add to Cart
  • 600 Grit Diamond Stone for SKS 3000 Swingcut Tool

    20mm x 30mm diamond stone for SKS 3000 SwingCut Tool. 600 grit diamond stone. Use for deburring or polishing edges. Note this stone is the same blue color as the 325 grit. The 600 grit is marked with red paint on the reverse, the 325 grit is not...

    AUD $17.68
    Add to Cart
  • Mill Cut File for SKS 3000 Swingcut Tool

    20mm x 30mm Mill Cut File for SKS SwingCut Tool. A general purpose file for sharpening and beveling. Can be used on base or side edges. Will fit the following SKS tools SKS3000, SKS3002, SKS3004, SKS3020, SKS3030, SKS3035. Sold each.

    AUD $14.73
    Add to Cart
  • Tungsten Carbide File for Swingcut Tool

    Tungsten Carbide File for SKS 3000 Swingcut Tool

    20mm x 30mm Tungsten Carbide File for SKS 3000 SwingCut Tool. Tungsten carbide files cut through metal smoothly, even hardcased metal. Longevity is many times that of standard files. Directional arrows on insert indicate cutting direction. Will fit...

    AUD $69.48
    Add to Cart
  • Toko Universal Edge Grinder

    This is aluminum oxide stone is a handy addition to your tool kit. Use it to deburr edges after a day of rock skiing, really saves unnecessary wear on your files and diamond stones. Not too rough and not too smooth, it's the Goldilocks stone! Aluminum...

    AUD $14.73
    Add to Cart
  • Swix Racing Pro Chrome File (Fine)

    Swix Racing Pro Chrome File (Fine)

    Swix light chrome race files are 100mm dual-sided files. Chromed for durability and tang-less for adaptability. Available in Coarse, Medium and Fine cuts. Fine (16TPCM) Cut 2 100mm (4" long) 100 x 25 x 3.5mm Dual sided Chromed Made in Portugal

    AUD $59.12
    Add to Cart
  • Pansar Cut File for SKS 3000 Swingcut Tool

    20mm x 30mm Mill Cut File for SKS SwingCut Tool. An aggressive file for rough cutting of side edge angles. We recommend only using this file on side edges, it is too aggressive for base edges. Will fit the following SKS tools SKS3000, SKS3002,...

    AUD $14.73
    Add to Cart
  • Swix Racing Pro Chrome File (Med)

    Swix Racing Pro Chrome File (Medium)

    Swix light chrome race files are 100mm dual-sided files. Chromed for durability and tang-less for adaptability. Available in Coarse, Medium and Fine cuts. Medium (14TPCM) Cut 1 100mm (4" long) 100 x 25 x 3.5mm Dual sided Chromed Made in...

    AUD $59.12
    Add to Cart
  • Replacement Panzar for Beast Sidewall Planer

    Replacement panzer file for the Beast Sidewall Planer. 70mm x 25mm Why Remove Sidewall Material? The files used to tune skis are generally high quality and do a fantastic job at cleanly cutting the hard steel edges found on modern skis and...

    AUD $22.12
    Add to Cart
  • Swix Ceramic Stone (Coarse)

    Use this stone after filing the edge and using a series of diamond stones. It will polish out the micro striations left by the diamond stones making the edge more durable so it will stay sharper longer. Thin profile fits a variety of bevel guides...

    AUD $29.52
    Add to Cart
  • Swix Racing Pro Chrome File (Coarse)

    Swix Racing Pro Chrome File (Coarse)

    Swix light chrome race files are 100mm dual-sided files. Chromed for durability and tang-less for adaptability. Available in Coarse, Medium and Fine cuts. Coarse (10TPCM) Cut 0 100mm (4" long) 100 x 25 x 3.5mm Dual sided Chromed Made in...

    AUD $59.12
    Add to Cart
  • Swix Ceramic Stone (Fine)

    Use this stone after filing the edge, using a series of diamond stones and the Swix Coarse Ceramic Stone. This stone will bring your edge to a super high degree of polish. It will polish out the micro striations left by the diamond stones making the edge...

    AUD $29.52
    Add to Cart
  • Vallorbe Icecut Race File (front) Vallorbe Icecut Race File (back)

    Vallorbe Icecut Race File 17TPI (Fine)

    An exquisite tuning file, very sharp and long lasting because it is made of stainless steel! The file feels weighty in the hand, is dead flat and will cut through edge material like no other. This is the fine version, 17 TPI.  Stainless...

    AUD $118.32
    Add to Cart
  • Mill File Insert 80mm

    Replacement file for Swix Phantom (TA3007) and Phantom R (TA3008) Edge guides as well as Toko Edge Tuner Pro (5549830) and Toko Edge Tuner (5549831). Hard chromed mill file 10 teeth/cm Length 80mm Sold each

    AUD $22.12
    Add to Cart