These drill bits are specially designed for mounting ski bindings. They ensure the holes are drilled at the correct diameter, and perhaps more importantly...at the correct depth. They fit any mounting jig, are a full 3" long, and will countersink the screw holes so you don't "bubble-up" the top ski surface when you tighten down the screw. The bits feature a pronounced lip which prevents the bit from drilling any deeper than it should. Bits are sold each.
- FOUR OPTIONS AVAILABLE (first number indicates diameter, second indicates depth)
- 3.6 x 9mm bit is best for most adult alpine skis without metal in the ski.
- 4.1 x 9mm bit is for alpine skis with a metal or titanal mounting plate internally located in the ski.
- 3.5 x 7mm bit is for junior alpine skis.
- Sold Each
19 Reviews Hide Reviews Show Reviews
Does what it's supposed to do
Works great! The step keeps you from drilling too deep and helps you have a clean flat surface to mount to.
Must have for mounting plates and bindings
My first occasion to mount alpine bindings, so I thought I should get the proper, albeit expensive, drill bit, but much cheaper than the $50.00 the ski shop wanted to mount the bindings. The bit worked well with no damage to the ski. Remember to use the 4.1mm size rather than 3.5mm if the ski has a carbon or other metal laminate.
Great bits, obviously must-have for mounting plates and bindings, but they do rust easily, compared to other bits.
I received a Wintersteiger branded bit. High quality tool steel, nice stuff.
Mounted bindings for the first time and this bit made it hassle free (apart from the measuring). I used the 4.1mm variant for skis with metal topsheets. Drilled cleanly through the metal, which I then tapped with another little tool from Tognar. Definitely use a nail or punch to make an indent where you intend to drill so that the bit doesn't wander.
Besides being quick it also is really easy to be very accurate and dead-on. I used it with Tyrol Ambition 12 bindings on Ramp Skis.
First time mounting bindings for me, and this bit made it easy, not having to worry about drilling to deep.Did great for my tele bindings