Loading... Please wait...

Quarterly Newsletter

The Eliminator Custom Tongues - Pair

0.10 LBS

Product Description

  • It's no secret that most boot fit and performance problems stem from oversized boots.
  • The Eliminator is a large, semi-soft foam pad with a smooth inner face that's designed to fit snugly behind your existing boot tongue.
  • The foam material custom-molds to your shin, they get even more comfortable with age.
  • It easily attaches, in seconds, with supplied fasteners (or permanently with contact cement).
  • They can help cure a myriad of ills, including shin bite relief, heel lifting and elimination of instep pain from overbuckling...particularly in snowboard boots.
  • It also reduces or eliminates excess room in upper boot cuffs... especially valuable for folks with thin legs or calves who have previously not been able to enjoy all the control boots are designed to deliver without cranking boot buckles impossibly tight, which usually has the undesirable effect of overly stiffening the forward boot flex.
  • Two sizes are offered.
  • Small fits boots US Mens sizes 3-8. Mondo Point sizes 22-25. (total length 10", width at widest is 3.75")
  • Large fits boots US Mens sizes 8.5 and up. Mondo Point sizes 25.5 and up. (total length is 10.75", width at widest is 4")
  • Sold as Pair.
  • Made in the USA.

Find Similar Products by Tag

Find Similar Products by Category

Write your own product review

Product Reviews

  1. Needs contact cement and trimming

    Posted by Unknown on 13th Feb 2014

    This gadget seems to take up the volume for my skinny legs, but it needed to be trimmed and it was a bit of a pain to adjust the positioning before I cemented it in place. It seems like cheaper tongue pads would do the same thing.

  2. Porblem solved !

    Posted by Fred on 8th Feb 2013

    After several boot fitting experiences, the Eliminator solved my heal lifting problem.

    Current boot are Garmont Voodoos

  3. Clutch!

    Posted by David on 5th Feb 2013

    I had been dealing with shin splints for the past couple seasons. With Eliminators - no more of that! Made my boots fit snug all the way through the ankle and shin

  4. Great eliminator

    Posted by C. Lyons on 4th Feb 2013

    Keeps my heel to the back of the boots and fills in all space and moving about of my shin against the tongue of the boot. Great invention!

  5. Didn't work for me.

    Posted by Gary on 12th Jan 2013

    A good idea on paper, just didn't work for me.

  6. Very effective

    Posted by Rod on 7th Jan 2013

    Good quality, comfortably takes up excess space in heal area and upper boot.

  7. Finally my boots fit!!

    Posted by Tahoe Randy on 17th Dec 2012

    I am 6'5" tall and have skinny lower legs. I have tried many ways to get boots tight enough around my lower leg - buckle really tight, different liners, etc. None of the previous attempts achieved a really good, comfortable fit. If you boots are loose around the calf, forget good control of the skis. I bought a pair of large Eliminators and now I am happy!! They fill the space and conform to your shin. I ski with good control and I don't need to carry a screwdriver to lever my boot buckles and warp the plastic to get them tight enough. Buy these and you won't be sorry!

  8. Fills the void :-)

    Posted by Gary V on 29th May 2012

    My shoe is a Men's 10.5 A. The foot volume is very low, being almost all skin & bone. I have "bird legs" as well. I was never able to get front-entry ski boots to clamp tight enough. I tried all of the wizard boot fitters in Mammoth. I was unimpressed. I had foam-to-fit liners made. These solved some problems but created others.
    The best luck that I had was these custom tongue inserts. They filled the area above my foot, pressing my foot down and back to where it belonged. The material is soft enough to conform to my foot, but firm enough to hold securely. Strong/aggressive skiers may find the foam too compressible, but it was perfect for me. I have cut some down for my hiking boots and for my street shoes.

Add to Wish List

Click the button below to add the The Eliminator Custom Tongues - Pair to your wish list.

Currency Converter

Choose a currency below to display product prices in the selected currency.

United States Minor Outlying Islands Default Currency
Australia Australia
European Union European Union
New Zealand New Zealand