Default Currency
Australia
New Zealand
European Union
Canadian Dollar
Product Description
Not for use with Binding Freedom Inserts.
- We offer plastic cant strips for your boot/ski alignment needs.
- Each cant strip is 2.25" (58mm) wide and 19.5" (50cm) long...sufficient for one binding plate (or toe and heelpiece).
- Always trim and drill the cant strip to match your plate or binding patterns.
- Make sure your binding screws are long enough to accommodate the extra cant thickness (especially on cants greater than 2 degrees).
- If not, check at your local ski shop for longer screws. Each degree of cant creates about 1.5mm of lift.
- Available in .5, 1, 1.5, 2, 2.5, and 3 degrees.
- Cant strips are sold individually.
Cant Strip Thickness (low side to high side) to aid in screw length determination.
Product Videos
Custom Field
Product Reviews
32 Reviews Hide Reviews Show Reviews
-
Necessary to correct foot pronation
Some background - I am an adult male skier with congenital foot deformities due to tarsal coalition (my feet pronate outwards bilaterally). While I have boots that are canted to bring my feet to a neutral position, this only works for alpine (downhill) boots. If you want to tour (skin), you cannot cant the boots themselves. The solution is to cant the bindings. Yes, you will have a left and right ski, but that is fine. Get your cant measured and then buy these shims in the recommend degree (but also consider additional shims with less/more angle). I have continued to swap shims (requires remount) because I initially overcorrected my pronation. No big deal, just go to the next shim. I am thankful that these exist, otherwise I would not be able to tour.
-
Ski Binding Cant Strip
No comment
-
Canting shim
This was my second shim. I started with 2 degree shim for my bowed left leg. I have been doing yoga and strengthening exercises which has brought my leg closer to alignment so switch to a 1 degree shim. Don't know any other place to get shims. Customer service is great.
-
Ski binding cant strip 2.5
Product works perfectly, solved my bow leg problem and makes it possible to use hybrid boots without having to remake the boots. Good value for money!
-
Cant strip 2.5 degrees
Mounted beneath my Salomon Shift 13 to adjust for my bow legs. Haven’t tried on snow yet, but the idea is to flatten the skis against the snow when standing in my natural position, without having to customize my hybrid boots. The plastic strips were easy to cut and mount, Great product.
-
cant strips
used strips under cross country ski bindings to help level ski to snow interaction. Easy to trim; didn't need longer screws. Would work for alpine but better there to modify the boot.
-
Cant Strip
Works great for my left leg stance problem. Customer service is fast and friendly.
-
binding cant
These are too narrow for modern ski bindings. Over priced. Had to make my own. Don't buy!
-
Ordered two 5 degree and received two 3 degree cants
Pleased with them but sizing was wrong and with duty etc. just left it. Last year's I got correct 2.5 degree order correctly.
