- This small 2-part bubble pack of urethane glue is ideal for repairs where the greatest flexibility and impact absorption is required (like delaminated tips and tails).
- It can also be used for polyurethane ski and snowboard boot shell modifications.
- The working time is 3-5 minutes, with a curing time of up to 60 minutes.
- Mixes to an off-white color.
- Net wt. 3.5 grams.
3 Reviews Hide Reviews Show Reviews
I used this urethane to repair where a landing go wrong had dalaminated my son's snowboard. It was liquid enough after mixing to work to the bottom of the flap of top layer and cleaned up nicely when clamping squeezed the excess out. It made a near invisible repair.
I have used this eurethane compound to repair delaminated tips on two pairs of skis and delaminated tails one one pair. I dries ay about the stated rate but I believe that full strength may need a full day, longer might be better but I just used 20 hours or so. Clamping is important and needs to squeeze the full length of the job to avoid bulges or voids. I used a firm clamping pressure which just pushed a little bit compound out of the join. Because this compound has bulk when dried some unevenness caused by cleaning of the ski can be tolerated. So far my patch has held for 2 weeks of sking, it looks as though it may last quite a while but only time will tell.
I used this epoxy to repair some top sheet de-lamination near the tip and tail plus a section in front of the binding. It was easy to use and so far the repairs have held. I was able to glue four areas of the ski with on package.