Product Overview
Not for use with Binding Freedom Inserts.
- We offer plastic cant strips for your boot/ski alignment needs.
- Each cant strip is 2.25" (58mm) wide and 19.5" (50cm) long...sufficient for one binding plate (or toe and heelpiece).
- Always trim and drill the cant strip to match your plate or binding patterns.
- Make sure your binding screws are long enough to accommodate the extra cant thickness (especially on cants greater than 2 degrees).
- If not, check at your local ski shop for longer screws. Each degree of cant creates about 1.5mm of lift.
- Available in .5, 1, 1.5, 2, 2.5, and 3 degrees.
- Cant strips are sold individually.
Cant Strip Thickness (low side to high side) to aid in screw length determination.
.5° = 1.0 to 1.53mm
1° = .60 to 1.56mm
1.5° = 1.0 to 2.31mm
2° = 1.3 to 3.17mm
2.5° = .80 to 3.30mm
3° = .95 to 3.80mm
