Replacement Ski Edge Section - 12 inches

(3 reviews) Write a Review

Product Overview

For all you mad ski and snowboard surgeons out there who need to replace broken or bent steel edges, we offer these 12-inch (305mm) sections of solid steel edges. The material is quite hard so make sure you have a Dremel or similar rotary tool to cut to the edge to length!

  • Sold each. 
  • Screws not included
  • Approx. 12 inches (305mm) long
  • Use in conjunction with our Edge Screws SPK-ES10.


  • Edge will likely be thicker than the existing edge. Once repair is completed you can file down the replacement edge section to match the existing edge thickness. Be sure to use a side file guide with the appropriate angle to do this.
  • Use a Dremel or similar rotary tool with a cutting wheel (the Dremel #409 Cutting wheels work well).

Product Videos


(3 reviews) Write a Review

3 Reviews Hide Reviews Show Reviews

  • 5
    12" replacement ski edge

    Posted by Stixy9 on Sep 02, 2020

    Exactly what I needed

  • 4
    Rescued a nice set of skis!

    Posted by George VanDegrift on Mar 08, 2020

    I am not a professional tech, but a good fixit guy. Along with Metalgrip Repair String, this was a fairly easy fix for a broken edge. Some useful YouTube videos to assist. Actual width of edge slightly wider than my original, but only a cosmetic issue. Otherwise, I would have given it top rating. Very quick shipment from Tognar.

  • 5
    This will save the life of your board or skis!

    Posted by Walt B on Feb 06, 2014

    Wow, I cannot say enough for how great this worked for me. When I smashed into a stump/rock/something and obliterated my edge, I thought I would have to drop hundreds of dollars on a new board. It should be noted you will need the small screws that are sold separately. With a little work, my board is back on the mountain, good as new, and at a fraction of the cost of total replacement.