Product Overview
For use with Binding Freedom Inserts only.
- Binding Freedom tooled their own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts.
- The head is tapered and fits like a flathead screw, but with a smaller diameter head so that they fit bindings which require a smaller diameter clearance.
- The underside of the head has locking serrations to help ensure that the screw doesn't back out over time.
- High quality stainless steel.
- For use with a Pozidriv #3 screwdriver.
- Determine the length and type of screw needed for your bindings from the Binding Freedom screw chart. We do not grind screw heads to reduce diameter.
- Thread pitch = .8
- Flat head screw lengths are measured over all length of the screw (the length of screw including the thread and head).
- Head diameter is 9.5mm.
- Sold each.
It is very important to maximize the number of threads engaged in an insert or a swap plate, so be sure to measure carefully. Inserts can accommodate from 3mm min to 6mm max of thread engagement. We like to target 4mm of thread engagement. Do not excede the min/max numbers for any reason - you will not get a secure mount. These screws fit exactly like allen head flatheads in terms of length.
