Binding Tools

 
Binding mounting drill bits, taps, screws, inserts, jigs, glue, etc. Basically all you need to mount 'em yourself. Also, maybe the last outpost of ski binding cants.
  • FK BRAKE RETAINER W/HOOK - EA

    Fk Brake Retainer W/Hook - Ea .

    These simple puppies pull ski brake arms up and out of your way for tuning ski bases and edges.  They feature a sturdy round rubber loop with a handy finger pull and hook so you don't pinch a pinkie in the process.  They go on fast and...

    $2.50
    Add to Cart
  • 5.5 x 15mm 5.5 x 11.5mm

    Alpine Binding Screws

    Alpine binding screws have a unique thread pitch and thread count compared to screws found in hardware stores. These are some of the most common lengths you'll run into. You will need to take an accurate measurement of your existing screws if looking...

    $0.50
    Choose Options
  • Plastic Binding Hole Plugs

    Plastic Binding Hole Plugs

    If you're remounting bindings, or mounting new bindings on old skis, use these plastic hole plugs to fill old binding screw holes you won't be reusing They'll keep out water that can otherwise freeze, expand and possibly create structural damage...

    $2.50
    Choose Options
  • Snowboard Binding Screws (Flathead) 10mm

    Snowboard Binding Screws (Flathead)

    These screws are for use on snowboard bindings with a base plate that requires a recessed bolt head (eg. Burton). The screws are 6mm in diameter, standard for snowboard inserts. We also offer conical washers that are designed to work with this type of...

    $0.50
    Choose Options
  • 3.5 x 7mm 3.6 x 9mm

    Alpine Binding Drill Bits

    These drill bits are specially designed for mounting ski bindings. They ensure the holes are drilled at the correct diameter, and perhaps more importantly...at the correct depth. They fit any mounting jig, are a full 3" long, and will countersink...

    $14.95
    Choose Options
  • Binding Hole Insert (Plastic)

    Binding Hole Insert (Plastic)

    Stripped binding holes happen, when you encounter one deal with it ASAP.  If the hole is not too enlarged you can cut up some steel wool and mix it into a batch of epoxy, insert the mix into the hole and reinstall the screw. This is a pretty bomber...

    $0.50
    Add to Cart
  • Ski Binding Cant Strip

    Ski Binding Cant Strip

    We offer plastic cant strips for your boot/ski alignment needs. Each cant strip is 2.25" (58mm) wide and 19.5" (50cm) long...sufficient for one binding plate (or toe and heelpiece). Always trim and drill the cant strip to match your plate or...

    $14.95
    Choose Options
  • #12AB SKI TAP

    #12Ab Ski Tap

    Some skis are made with a metal sheet inside, or have a hard insert in the core so that you need to tap screw holes before mounting bindings.  Use the #12 AB tap to thread these binding holes on skis with a hidden top metal sheet (common on GS...

    $19.95
    Add to Cart
  • Roo Binding Glue - 2oz

    Roo Binding Glue - 2oz

    Use this glue when installing binding screws on skis. It is a flexible, water resistant acrylic adhesive designed to bond porous material to non porous material.  Setting time: 4 hours @ 70°F Work time: 20 minutes Impermeable to water...

    $8.95
    Add to Cart
  • Binding Freedom Threaded Inserts (single)

    Binding Freedom Threaded Inserts (single)

    For use with Binding Freedom screws only, normal alpine binding screws will not work. Threaded inserts for skis. For use with any of Binding Freedom M5 screws. High quality stainless steel.  Overall insert length 9mm. Sold individually...

    $1.50
    Add to Cart
  • Binding Hole Insert Screw-In (Brass)

    Binding Hole Insert Screw-In (Brass)

    These special brass inserts are intended to repair badly damaged screw holes. They are designed to be screwed into an 8mm hole. The aggressive threads on the outside of the insert bite into the ski core and create a bomber repair. The internal threads...

    $1.00
    Add to Cart
  • High Peel Epoxy

    High Peel Epoxy

    3.5 gram single use packet of epoxy appropriate for ski mounting screws or threaded insert installation (not for threadlocking metric mounting screws). This is a general purpose epoxy selected for an excellent balance of working time, hardening time,...

    $2.95
    Add to Cart
  • #3 POZIDRIVE BIT- 2.75' LENGTH

    #3 Pozidriv® Bits

    These stout #3 pozidriv® bits are designed to fit into electric drills. We recommend final tightening of all binding screws be done by hand to reduce the risk of stripping. Offered in two lengths: 2.75" or 6". Sold each.  

    $7.95
    Choose Options
  • Wiha Pozidriv® #3 Screwdriver Wiha Pozidriv® #3 Screwdriver

    Wiha Pozidriv® #3 Screwdriver

    We offer this precision #3 Pozidriv® screwdriver for installing and removing the screws common to alpine, nordic and some snowboard bindings. Pozidriv® offers better purchase than standard phillips drivers reducing the chance of cam-out...

    $23.95
    Add to Cart
  • WOOD PLUGS- BAG of 10

    Binding Hole Plugs - Wood 10 per bag

    When a binding screw pulls clear out of a ski, the hole is stripped and needs repair.  One of the cheapest and simplest solutions is to fill it with fast-setting epoxy and tap one of these wooden plugs in as far as is comfortable.  Let it...

    $2.95
    Add to Cart
  • Inserts sold separately.

    Snowboard Insert Drill Bit

    This drill bit is required for installation of plastic capped snowboard inserts.  Requires first drilling a pilot hole to guide the bit with a 5/16" (8mm) drill bit (not included).  This special bit cuts a precise 110 deg. tapered hole to...

    $64.95
    Add to Cart
  • Ski Powder Cords - 4 Foot Length

    Ski Powder Cords - 4 Foot Length

    Ski brakes work great on packed snow...but if your bindings release in deep powder, you may need a metal detector to find 'em again.  Attach one end of these bright orange 4" long nylon cords around a ski brake arm and tuck the rest under your...

    $7.95
    Add to Cart
  • JigaRex™ Plates JigaRex™ Plates

    JigaRex™ Plates

    These binding plates attach directly to the JigaRex™ Mounting Jig (sold seperately). Simply choose your binding in the drop down menu. The drill guides holes on the plates are designed to work with proper binding mounting drill bits (not...

    $44.95
    Choose Options
  • Toko Pocket Driver

    Toko Pocket Driver

    This compact ratcheting tool contains everything you need to keep your snowboard bindings functioning. The ergonomic handle contains #2, #3 Phillips, #3 Pozidriv®, #6 flat, #4 Hex and a 10/11mm wrench. Rounded profile is pocket friendly.

    $12.95
    Add to Cart
  • Binding Hole Insert (Brass)

    Binding Hole Insert (Brass)

    Stripped binding holes happen, when you encounter one deal with it ASAP.  If the hole is not too enlarged you can cut up some steel wool and mix it into a batch of epoxy, insert the mix into the hole and reinstall the screw. This is a pretty bomber...

    $1.00
    Add to Cart
  • HELICOIL SCREW INSERT KIT

    Helicoil Screw Insert Kit

    These kits are designed to repair badly stripped or ripped-out binding screw holes in skis.  They utilize stainless spiral inserts that you thread into the damaged screw holes after enlarging and tapping them.  All necessary parts are...

    $139.95
    Choose Options
  • Binding Freedom Threaded Inserts (20 pack)

    Binding Freedom Threaded Inserts (20 pack)

    For use with Binding Freedom screws only, normal alpine binding screws will not work. Threaded inserts for skis. For use with any of Binding Freedom M5 screws.   High quality stainless steel. Overall insert length 9mm. Sold in a bag of 20...

    $25.95
    Add to Cart
  • Nordic Binding Screw

    Nordic Binding Screw

    Lose a screw for your Nordic bindings? These are Nordic specific screws, meaning the thread pitch and head profile are unique to many Nordic bindings. If you're looking to mount an old pair of 3-pins these are the screws for you. NNN Bindings vary, so...

    $0.50
    Add to Cart
  • JigaRex™ Frame (binding plates are sold separately) JigaRex™ with plates attached (binding plates are sold separately)

    JigaRex™ Ski Binding Mounting Jig

    This is a great tool for garage ski techs and pros alike. Once you invest in the JigaRex mounting jig the world is your oyster, well the binding mounting world anyway. Simply buy the relatively inexpensive Binding Plates as you need them, no need to...

    $249.95
    Add to Cart
  • 10mm 12mm

    Snowboard Binding Screws (Roundhead)

    These screws are for use on snowboard bindings with a base plate that does not require a recessed bolt head. The screws are 6mm in diameter, standard for snowboard inserts. We also offer flat washers that are designed to work with this type of screw...

    $0.50
    Choose Options
  • Binding Freedom Insert Installation Tool Shown with insert attached

    Binding Freedom Insert Installation Tool

    This tool is specifically designed to aid in installing threaded inserts.  It has features which interface with the slots on the threaded inserts to screw them into place.  It is much easier to use than a slotted screwdriver because it...

    $19.95
    Add to Cart
  • Automatic Center Punch

    Automatic Center Punch

    This spring-loaded center punch creates a well defined mark on the top sheet of your ski to help center your drill bit. One-handed operation does not require the use of a hammer. Perfect for use with paper binding mounting templates or free-hand...

    $13.95
    Add to Cart
  • Binding Freedom Insert Installation Tap

    Binding Freedom Insert Installation Tap

    5/16-18 Bottoming Tap for threaded insert installation.  After drilling a 9.5mm deep hole with an "F" drill (.257" diameter), the tap is used to cut threads all the way to the bottom of the hole to install the insert.  A standard tap won't...

    $21.95
    Add to Cart
  • Nordic Binding Drill Bit

    Nordic Binding Drill Bit

    This drill bit is specially designed for mounting Nordic ski bindings, it has a greater depth than most common alpine drill bits. It ensures the holes are drilled at the correct diameter, and perhaps more importantly...at the correct depth. It will fit...

    $14.95
    Add to Cart
  • Binding Freedom Insert Hole Deburring Tool

    Binding Freedom Insert Hole Deburring Tool

    The ideal solution for deburring ski topsheets after drilling for Binding Freedom inserts. This countersink deburring tool is perfectly sized for an insert hole, and makes the tapping operation easier. Can be used with a hand-drill, drill-press, and...

    $29.95
    Add to Cart
  • Vibra-Tite DriveGrip

    Vibra-Tite DriveGrip

    Sometimes screws or bolts are so tight, or the heads so rounded that a driver can't get enough purchase to back them out. This situation usually requires grinding, drilling and cursing to remove the offending head and ultimately extract the bolt. There...

    $5.95
    Add to Cart
  • Adjustable Depth 8mm Drill Bit

    Adjustable Depth 8mm Drill Bit

    If you have a stripped out binding hole on your ski often the best solution is to install a plastic or a brass insert. This tool creates the proper diameter hole at the correct depth. It includes an 8mm drill bit, which is the proper diameter for the...

    $29.95
    Add to Cart
  • SNOWBOARD BINDING SCREW TAP

    Snowboard Insert Tap

    This is 6 x 1mm tap is used for tapping or cleaning damaged machine threads in snowboard inserts. It has four flutes and is a "bottom" tap, which means the tip is not pointed so it will tap to bottom of your insert. This tool is a life...

    $19.95
    Add to Cart
  • Multiguage Binding Drill Bit

    Multiguage Binding Drill Bit

    This is a multiguage ski mounting drill bit, starting at 3.3mm and stepping up to 4.1mm. Depth is 11mm. 3.3/4.1mm x 11mm Robust lip stops bit at the appropriate depth (11mm). Diameter fits standard binding jigs.

    $26.95
    Add to Cart
  • Hollow Core Drill Bit

    Hollow Core Drill Bit

    If you're eyeballing this drill bit things have probably gone a bit south! Hopefully this clever tool will solve your problem. Designed to remove broken binding screws and a bit of the surrounding material leaving a clean 8mm diameter hole, which just...

    $29.95
    Add to Cart
  • Wiha #3 Phillips Screwdriver Wiha #3 Phillips Screwdriver

    Wiha #3 Phillips Screwdriver

    This top-notch #3 Phillips screwdriver is perfect for installing and removing the screws the base plates of most snowboard bindings. This is a different driver than the #3 Pozidriv® that is used on Alpine and Nordic binding screws. We love Wiha...

    $23.95
    Add to Cart
  • Torx® Driver Bit T20

    Torx® Driver Bit T20

    Give your paws a break, use this bit to get all those pesky binding screws started. To avoid the risk of stripping out a screw we recommend setting the choke on your drill as low as you can, and always do the final tighten by hand. Torx® T20...

    $14.95
    Add to Cart
  • Torx® Driver Bit T25

    Torx® Driver Bit T25

    Give your paws a break, use this bit to get all those pesky binding screws started. To avoid the risk of stripping out a screw we recommend setting the choke on your drill as low as you can, and always do the final tighten by hand. Torx® T25...

    $15.95
    Add to Cart