These drill bits are specially designed for mounting ski bindings. They ensure the holes are drilled at the correct diameter, and perhaps more importantly...at the correct depth. They fit any mounting jig, are a full 3" long, and will countersink the screw holes so you don't "bubble-up" the top ski surface when you tighten down the screw. The bits feature a pronounced lip which prevents the bit from drilling any deeper than it should. Bits are sold each.
- FOUR OPTIONS AVAILABLE (first number indicates diameter, second indicates depth)
- 3.6 x 9mm bit is best for most adult alpine skis without metal in the ski.
- 4.1 x 9mm bit is for alpine skis with a metal or titanal mounting plate internally located in the ski.
- 3.5 x 7mm bit is for junior alpine skis.
- Sold Each
19 Reviews Hide Reviews Show Reviews
Using this bit saved me heaps of time on my last mount. Should have gotten one of these sooner.
Why the heck didn't I get one of these years ago? Great product. The stress-reduction alone is well worth the price of the bit.
Very good results with nordic bindings. It is hard to do without these if you use a jig.
Mounted a pair of telemark bindings with these bits and they were very easy to use with an electric drill (freehand). I've since bought a drill guide to make it a little easier to drill perpendicular holes rather than reading the level as I'm drilling. On my Blizzard Bushwackers it took more effort than I was expecting to get through the metal topsheet in the binding area with the 4.1 drill bit, doesn't seem very sharp or I need to adjust my drilling speed some more. Once I got through the metal layer it went through the wood core very easily.
Not that it is horribly hard to limit depth while drilling a hole, these bits make it incredibly easy. Just punch down with a drill press until the flats contact the ski surface.
Depth and diameter are spot on every time. Sharp bit for precise holes.
why mess around? This bit takes the work out of mounting bindings. Gets the right depth and lasts
There's nothing really to say. This is the right product for the job.
Nothing like a sharp bit to expedite mounts.