TOKO BRASS ROTOBRUSH

Toko Ski Rotobrushes - Nylon, Brass, Horsehair & Cork

Price:

$49.95

SKU:

TOK 2520

Brand:

Toko

Weight:

0.80 LBS

Rotobrushes and corks
Used by many of the world's top national teams and factory service technicians
They save time and help create the fastest bases as well.
Rotobrushes are very versatile...they can be used to remove wax, open and uncover base structure, cut away unwanted p-tex hairs and polish bases.
We offer a complete selection of handles, brushes and attachments.
To operate, slip the desired brush or attachment onto a control handle, clamp the handle into any electric or battery-powered drill, and start the drill.
Roto-brushes are designed to operate at speeds between 800 and 2500rpm... enough to launch tiny wax particles in the air -So wear safety goggles unless they have a shield installed

Toko 100mm Wide With 10mm Brass Bristles
Use to remove old wax and clean base structure before applying new wax.
It can also be used to remove excess new hard wax from structure after hot-waxing and scraping to remove very hard wax (very cold snow conditions) from base structure.
Use back and forth at medium pace with light pressure at 800rmp, followed by two tip-to-tail finishing strokes

Toko 100mm Wide with 10mm X .2mm Soft Black Nylon bristles
Use to remove excess softer waxes (warmer snow conditions) from base structure.
Also good for polishing.
Use back and forth atmedium pace with light pressure at 2500rpm, followed by two tip-to-tail finishing strokes.

Toko 100mm Wide With 6mm X .25mm Horsehair Bristles
Use after hot-waxing and scraping to remove hard or medium hard waxes from base structure.
Also good for wax polishing, as well as for fitting a roto omni-prep pad over
Back and forth with medium pressure at 2500 rpm followed by 2 tip-to-tail finishing strokes