• CERA FC10L
• Wet snow
• 36 F (2 Degrees C) and above
• Use as a final layer over either Cera FC10 or FC2S  
• Apply with felt pad (included) and let dry 5 minutes before handcorking (included), or rotocorking (for greater durability). 
• Finish with a nylon polishing brush. 
• This liquid formula will insure there are no “voids” (such as at the very bottom of structure rills) for optimal 100% fluorocarbon wax performance.
• 29ml

A Bit About Cera F

This is the stuff for fastest acceleration and speed on many race days. 

• Swix Cera F is a 100% fluorocarbon "wax" that is extremely water-repellent (hydrophobic), minimizes friction (30% less than Teflon)
• Doesn't attract dirt or pollen, bonds easily to bases, and comes in several different formulations for a wide range of race conditions. 
• Cera F can be applied by hand with a synthetic (divinucell) cork for any alpine race and nordic races of 10km or less...or ironed in for greater durability on longer courses. 
• For best results, apply Cera F atop a base layer of hydro or fluoro wax that has previously been ironed in, scraped and brushed. 
• For quick re-application on a race course, simply apply a little Cera F on the base and cork it in. 
• Follow all Cera F applications using a polishing brush and pad. 
• It works equally well on snowboards, alpine or nordic skis.