TOGNAR HORSEHAIR BRUSH

Home
Waxing Tools
Ski Waxing Brushes Tognar Logo*

Home
Waxing Tools
Ski Wax Brushes
Ski Waxing Brushes Tognar Logo*

Ski Waxing Brushes Tognar Logo*

Price:

$14.95

SKU:

APG 710

Brand:

Tognar

Weight:

0.45 LBS

Product Description

*Please note, the BRASS and WHITE NYLON brushes do not have the Tognar logo, we have sold out of them until September. The brushes we are currently shipping are identical (same models/manufacturer) but without our snazzy snowflake logo.

BRASS BRUSH
The fine brass bristles on these brushes remove cold hard waxes from fine base structures
helps keep the base surface fresh and free of oxidized scale.
They also helps raise loose P-tex hairs so they can be cut away with Scotchbrite or a steel scraper.
Do not use for fluorocarbon overlays and waxes because it can scour it away
In fresh cold snow this brush can expose irregularities in the structure that catch sharp new snow crystals and create drag, so follow it's use with a horsehair brush, wax buffing pad or felt polishing block.
3" x 5".
*We have sold out of this brush with the Tognar Logo, we will be shipping the same brush w/o our logo until Sept. 2012.*

COMBO BRASS/NYLON BRUSH
It's a combination of brass and nylon bristles that is good for removing any excess wax (after scraping your hot wax) from any base structure.
If you want one brush to handle most all your needs, this is the one to get.
The thicker nylon bristles gently remove wax from any coarse structures, while the brass bristles clean out fine structures.
Measures 3" x 5".

WHITE NYLON BRUSH
This is a good brush to use for removing excess warmer waxes from a coarse base structure.
The thicker nylon bristles impart a slightly smoother surface than horsehair or brass brushes by leaving some wax in the deepest parts of the base structure.
Measures 3" x 5".
*We have sold out of this brush with the Tognar Logo, we will be shipping the same brush w/o our logo until Sept. 2012.*

FINE STEEL BRUSH
Designed to be used for initial brushing after scraping excess wax (hard or soft) from any structure pattern (fine, medium or coarse) on any ski or snowboard base.
They can also be used as a polishing brush for hard waxes.
These durable fine steel brushes feature soft steel bristles
Although initially more expensive than brass or copper brushes, these steel bristles stay sharper, are more durable, have better memory and don't deform as easily over time.
Measures 3" x 5".

HORSEHAIR BRUSH
This brush is used primarily for final brushing of any waxes, since it leaves a finer finish than other brushes.
Use it for brushing Swix Cera F, Toko Jetstream and other fluorocarbon waxes after ironing or corking them into a base.
One brush should be reserved for using only with 100% fluorocarbons...as the bristles fill with excess wax or powder it can be used at the race start for giving bases their final brushing.
Measures 3" x 5".