
|
ski visions side and base bevel tool |
||
| Ski Visions Edge Bevel Tool with mill files |
Item #SVN-SS: $54.95 |
Click Image To Enlarge
|
| This is a precision beveling tool for skis and snowboards that independently sharpens and bevels the side and bottom surface of one steel edge simultaneously. It includes two mill file inserts for filing and beveling, a file cleaning brush and instructions. Adjustable from 0 to 3 degrees in 1/4 degree increments. Optional inserts- a wide variety of deburring and polishing stones...use the coarse 180-grit ruby stones to initially treat rock-damaged edges and sharpen edges. Use the 350-grit ruby stones to deburr edges after filing or beveling, followed by the gummi stones. The ceramic stone inserts are used for final honing and polishing the edges. This progression can provide greater edge smoothness, sharpness and durability...plus conditions the edges so files can work with less effort. At an absolute minimum, we recommend using the 350-grit stone (especially along tips and tails) for daily touch-ups. Also available are optional carbide steel skyver blades for rapidly 'roughing in' side edge bevels and gummi stones for removing rust and final polishing. The stones can be redressed with the optional 100 grit diamond stone for longevity- always redress under running water! Ski Sharp tool includes the Skivisions tuning stick. For more information on using this versatile tool,click here. | ||
|
|
||
| Ski Visions Tuning Stick |
Item #SVN-TS :$4.95 |
Click Image To Enlarge
|
|
Checking the sharpness of steel edges has long been a bit of a guessing game for most tuners. Shaving the face of your fingernail, or dragging the side of a pinkie finger across an edge doesn't provide consistently reliable or accurate feedback...unless maybe you're an ultra-experienced World Cup level technician. This tuning stick helps resolve that. It's made of a special hard plastic that subtly communicates how sharp or dull your edges are. You hold it at a 45-degree angle to the edge and, bearing down with moderate pressure, simply slide and try to shave some stick material away. If the edge is sharp, you'll feel and hear a noticeable resistance and sound. If the edge is dull, the stick will not shave...but slide without much resistance or sound. When you first get a tuning stick, try it on some edges you've ridden for a day or two. You'll be surprised how much duller they usually feel underfoot (due to greater wear from skier/rider weight and pressure) than at the tips and tails. Try it again after tuning and see the difference...it will be noticeable if you've tuned effectively. If you impart a sharper bevel angle underfoot than at the tips and tails, the stick will also detect this. Likewise, you'll also be able to hear and feel the difference between burred edges and deburred/polished edges. The SkiVisions tuning stick is such a simple yet revealing tool that can give you invaluable tuning feedback. | ||
|
Optional inserts for Ski Vision Ski Sharp |
||
| Replacement mill file inserts |
Item #SVN-SSMF :$12.95 pr |
Click Image To Enlarge
|
| Two mill file inserts for filing and beveling | ||
|
|
||
| Carbide skyver blade Insert |
Item #SVN-SSCS : $19.95 ea |
Click Image To Enlarge
|
| Optional carbide steel skyver blade for rapidly 'roughing in' side edge bevels. Ffitting shims included. | ||
|
|
||
| 180 grit (coarse) sharpening ruby stones |
Item #SVN-180 :$9.95 pr |
Click Image To Enlarge
|
| Coarse 180-grit ruby stones to initially treat rock-damaged edges and sharpen edges | ||
|
|
||
| Green Stones |
Item #SVN-GREEN :$9.95 pr NEW! |
|
|
New are these green stones which are aggressive silicon carbide stones that love to eat hard metal. THEY ARE NOT POLISHING STONES. They have very specific purposes. NEW SKIS: These stones are for working edges that have been hardened at the ski factory from misuse of the tuning equipment. HARD SNOW: When you want your edges sharper than you are getting with the 180 grit ruby stones but you don't want to go to the extra steps involved with going to the files and subsequent polishing routines. | ||
|
|
||
| 350 grit (fine) deburr/polishing stones |
Item #SVN-350: $9.95 pr |
Click Image To Enlarge
|
| 350-grit ruby stones to deburr edges after filing or beveling | ||
|
|
||
| Ski Visions Coarse Gummi stones |
Item #SVN-SSGS: $9.95 pr |
Click Image To Enlarge
|
| These are second to last finishing stones, the last steps in the edge tuning process. | ||
|
|
||
| Ski Visions Fine Gummi Stones |
Item #SVN-SSGSF: $9.95 pr |
Click Image To Enlarge
|
| These are final finishing stones, the last step in the edge tuning process. | ||
|
|
||
| Stone redressing tool |
Item #SVN-SSDF: $19.95 OUT OF STOCK UNTIL FALL |
Click Image To Enlarge
|
| Try using the moonflex 100 grit diamond stone to redress ruby stones and stucture blades | ||
|
multi tuner side and base bevel tool |
||
|
|
Item #MTK-701 : $39.95 |
|
| This popular and precise tool bevels base and side edges (although not simultaneously) from 0 to 5 degrees in 1/2 degree increments. It comes with a replaceable 2.75" steel mill file, which is inserted vertically in the tool to work on side edges, and horizontally for base edges. The tool is small enough for travel. Optional inserts include a pansar file insert for rapidly "roughing-in" new side edge bevels, and a versatile set of diamond stones (use the coarse black stone for initially working on rock-damaged edges; the medium blue stone for daily edge deburring; and the fine red stone for final edge polishing).Click here for instructions. | ||
|
OPTIONAL INSERTS FOR MULTI EDGE TUNER |
||
| Replacement mill file insert 2.75" |
Item #MTK-702 : $9.95 |
Click Image To Enlarge
|
|
|
||
| Optional Pansar File insert |
Item #MTK-702P 2.75": $12.95 |
Click Image To Enlarge
|
| Pansar file insert for rapidly "roughing-in" new side edge bevels | ||
|
|
||
| Diamond stone set for Multi Tuner |
Item #DMT-WS7K: $25.95 |
Click Image To Enlarge
|
| Set of diamond stones (use the coarse black stone for initially working on rock-damaged edges; the medium blue stone for daily edge deburring; and the fine red stone for final edge polishing) - set of 3- fine, medium and coarse 2.75"long | ||
|
Bevel Guides |
||
| Prosharp Adjustable base Bevel Guides |
Item #SPK-401112 $44.95 |
|
| A durable aluminum base bevel guide that is adjustable from .5° to 1.5° in .25° increments. Fits any file, stone or diamond up to 6mm (1/4") thick and 10 " long and positions them at the optimum angle for smooth cutting and polishing. | ||
|
|
||
| Prosharp adjustable Side bevel guide |
Item #SPK-401140: $44.95 |
|
| This adjustable side bevel guide glides along the ski base on four roller bearings, reducing the chance of imbedding filings into the structure. It accommodates angles from 0° to 5° in 1° increments (requires screwdriver or coin for adjustment). It will accept files, stones and diamond stones up to 6mm (1/4") thick and 5" long. Will not fit the DWH-HARD or DWH-TRANS. Includes a 3" (75mm) Icecut mill file. Length of tool is 5 1/4". | ||
|
tool cleaning |
||
| Nylon Supertooth brush |
Item #BM-93APN : $1.95 |
|
| These industrial grade toothbrushes feature sturdy nylon bristles for regular cleaning. Especially useful for cleaning steel filings, wax, p-tex and debris from hard-to-reach file inserts in bevel tools. | ||
|
|
||
| Brass Supertooth brush |
Item #BM-93APB: $1.95 |
|
| Brass bristles for tougher cleaning. Especially useful for cleaning steel filings, wax, p-tex and debris from hard-to-reach file inserts in bevel tools and from the teeth of mill files. | ||
|
cutting and polishing fluid Apply a squirt of this fluid to ceramic, arkansas or diamond stones to help reduce friction and residue build-up while deburring and polishing steel edges. 2 oz. spray bottle. |
||
| Cutting/Polishing Fluid |
Item #SVT-SS2: $9.95 |
|
|
base tape Apply strips of this ultra-thin tape to your base along steel edges before filing or beveling. It protects your base from filings and grime that otherwise get ground into the p-tex, plus help protect the base structure from being scratched by files or bevel guides. This PVC tape peels off without leaving harmful residue. |
||
| Swix base Tape |
Item #SWX-R390: $15.95 |
|
| 2" wide x 50-yard roll. | ||
|
|
||
| dominator base tape |
Item #DOM-TAPE :$9.95 |
Click Image To Enlarge
|
| 1.5" wide x 50-yard roll. Colours vary | ||
|
|
||
| Holmenkol Base Tape |
Item #HOL-20740 : $9.95 |
Click Image To Enlarge
|
| 1.5" wide x 50-yard roll. | ||
|
|
||
| Toko Base Tape |
Item #TOK-7007 :$9.95 |
Click Image To Enlarge
|
| 1.5" wide x 50-yard roll. | ||
|
kunzmann bevel gauges These professional-quality German gauges let you quickly check the bevel on any ski or snowboard. Made of steel for precision and durability |
||
| base and side bevel gauge |
Item #MTK-3157 : $69.95 |
|
| Quickly check the base or side edge bevel on a ski or snowboard. The 3157 measures side bevel from 0° to 5° in 1 degree increments, and base bevels in 1/2°, 3/4°, 1°, 1-1/4°, 1-1/2° and 2°. | ||
|
|
||
| Side only bevel gauge |
Item #MTK-3159 : $39.95 |
|
| The 3159 measures side angles only from 0° to 5° in 1 degree increments | ||
|
bevel labels |
||
| Edge Bevel stickers |
Item #SVT-BSES : $.50/pair |
|
| Keep track of base and side-edge angles with these adhesive waterproof Mylar labels. Use a permanent marker for best results. Sold in pairs. | ||
|
beast Base bevel file guides The economical Beast guides feature a plastic body with a stainless steel bridge, and are ideal for most home tuners. These precise base bevel guides are used in conjunction with your favorite steel files, diamond stones or ceramic stones. They lift and hold one end of the file or stone at a fixed height, while allowing the other end to rest on one base edge. This creates and ensures a precise and consistent base bevel from tip-to-tail (without being influenced by sidecut curvature) when filing or deburring any ski or snowboard. |
||
| beast base edge file guide 0.5 degree |
Item #BTS-05: $19.95 |
Click Image To Enlarge
|
| Orange | ||
|
|
||
| beast base edge file guide .75 degree |
Item #BTS-07 : $19.95 |
|
| Green | ||
|
|
||
| beast base edge file guide 1 degree |
Item #BTS-10 : $19.95 |
|
| Red | ||
|
|
||
| beast base edge file guide 1.5 degree |
Item #BTS-15 : $19.95 |
|
| Blue | ||
|
|
||
| beast base edge file guide 2 degree |
Item #BTS-20 : $19.95 |
|
| Black | ||
|
final cut base bevel guides The Final Cut guides are machined from aluminum and stainless steel, and feature replaceable delrin pads where the tool contacts steel edges. As a result, it is more durable and favored by team, school or club technicians who do more tuning work than the average home mechanic. These precise bevel guides are used in conjunction with your favorite steel files, diamond stones or ceramic stones. They lift and hold one end of the file or stone at a fixed height, while allowing the other end to rest on one base edge. This creates and ensures a precise and consistent base bevel from tip-to-tail (without being influenced by sidecut curvature) when filing or deburring any ski or snowboard. |
||
| Final Cut Base Bevel guide .5 degree |
Item #SVT-TFC5 : $74.95 |
Click Image To Enlarge
|
| Silver | ||
|
|
||
| Final Cut Base Bevel guide .7 degree |
Item #SVT-TFC7 : $74.95 |
|
| Green | ||
|
|
||
| Final Cut Base Bevel guide 1 degree |
Item #SVT-TFC1 : $74.95 |
|
| Blue | ||
|
|
||
| Final Cut Base Bevel guide 1.5 degree |
Item #SVT-TFC15 : $74.95 |
|
| Red | ||
|
|
||
| Replacement Delrin Pads for final cut guides |
Item #SVT-RR - pr $7.95 |
Click Image To Enlarge
|
| Replacement Delrin Pads for final cut guides for the area of contact between guide and steel edges. | ||
|
svst pro edge side bevel guides These file guides guarantee precise side edge beveling. They are used in conjunction with any files or stones. Hold the face of the guide against your base, and set your stone or file on the top platform. The guides feature a recess to catch steel filings so they don’t grind into bases. Three precision models are offered... The Aluminum Pro-Edge Guides are made of 100% hard anodized aluminum and are an excellent choice for home mechanics. The Stainless Pro-Edge Guides are milled from solid stainless steel for unsurpassed accuracy and durability. In between the two models we offer the Pro-edge guide with a stainless steel face plate for longer wear. All models accept optional machined aluminum shims that can be used to increase the designated bevel angle of either guide from 1/2 to 2 degrees. The shims set firmly into a machined groove on any Pro-Edge guide. Optional clamps are strongly recommended to secure your file or stones to these guides... they help ensure precise tuning results. The Spring Clamp (fits all stones and files), Swix (fits files and thin stones), the SVT Clamp (files only) and the Tognar Clamp (all files and stones). |
||
| Aluminum Pro edge Guide 0° bevel |
Item #SVT-PEB90 :$26.95 |
|
|
|
||
| Aluminum Pro edge Guide 1° bevel |
Item #SVT-PEB91 :$26.95 |
|
|
|
||
| Aluminum Pro edge Guide 2° bevel |
#SVT-PEB92 :$26.95 |
|
|
|
||
| Aluminum Pro edge Guide 3° bevel |
Item #SVT-PEB93 $26.95 |
|
|
Stainless steel faced Aluminum bevel guides The Pro-edge aluminum guide with a stainless steel face plate for longer wear. |
||
| svst pro edge side bevel guides 0 degree |
Item #SVT-PEBS90 : $34.95 |
|
|
|
||
| SVST pro-edge Side edge bevel guide 1 degree |
Item #SVT-PEBS91: $34.95 |
|
|
|
||
| SVST pro-edge Side edge bevel guide 2 degree |
Item #SVT-PEBS92: $34.95 |
|
|
|
||
| SVST pro-edge Side edge bevel guide 3 Degree |
Item #SVT-PEBS93 : $34.95 |
|
|
|
||
| SVST pro-edge Side edge bevel guide 4 Degree |
Item #SVT-PEBS94 : $34.95 |
|
|
svst pro edge stainless steel The Stainless Pro-Edge Guides are milled from solid stainless steel for unsurpassed accuracy and durability. |
||
| Stainless steel Pro edge Guide 1° bevel |
Item #SVT-SSEB91: $69.95 |
|
|
|
||
| Stainless steel Pro edge Guide 2° bevel |
Item #SVT-SSEB92: $69.95 |
|
|
|
||
| Stainless steel Pro edge Guide 3° bevel |
Item #SVT-SSEB93 : $69.95 |
|
|
|
||
| Stainless steel Pro edge Guide 4° bevel |
Item #SVT-SSEB94 : $69.95 |
|
|
pro-edge bevel shims These optional shims can be fitted to any of the Pro Edge Bevel Guides above to incrementally increase their bevel angle. |
||
| Pro-Edge side Bevel Guide Shims 1 Degree |
Item #SVT-PEBA1 : $19.95 |
|
| Blue. Shim only, guide not included. | ||
|
|
||
| Pro-Edge side Bevel Guide Shims 2 Degree |
Item #SVT-PEBA2 : $19.95 |
|
| Purple. Shim only, guide not included. | ||
|
|
||
| Pro-Edge side Bevel Guide Shims 3 Degree |
Item #SVT-PEBA3 : $19.95 |
|
| Green. Shim only, guide not included. | ||
|
Clamps for Side Bevel Guides Clamps are strongly recommended to secure your favorite file or stones to any of the side bevel guides above. They are not only convenient, but also greatly help to ensure more precise tuning results. |
||
| Spring Clamp |
Item #ACE-3201 : $3.95 |
|
| Spring Clamp (pincher clamp, good for home tuners). | ||
|
|
||
| SVT Thumbscrew clamp |
Item #SVT-PEBC : $14.95 |
Click Image To Enlarge
|
| Thumbscrew clamp, most secure for pro tuners. Only fits the Pro Edge bevel guides. Not compatable with moonflex stones | ||
|
|
||
| Swix Thumbscrew Clamp |
Item #SWX-TA20 : $19.95 |
|
| Swix Thumbscrew Clamp, most secure for pro tuners. Fit any of the above base bevel guides. | ||
|
side wall planers It's often frustrating and difficult to bevel the side edges on skis and snowboards because overhanging plastic sidewall material gets in the way to impede cutting action and quickly clog up file teeth. Removing this plastic material makes beveling and filing much easier. It can be done if you're ultra careful using a hand-held file, but this is tricky stuff for most mere mortals since it's also real easy to slip up and damage your steel edge in the process. The safest and fastest way is to use a sidewall planer. These tools utilize a sharp carbide steel blade to shave away as much (or little) of the plastic sidewall material as you want at a precise depth from tip to tail. |
||
| beast Side wall planer |
Item #BTS-PLANE $39.95 New! |
|
| Use this clever tool to quickly remove just enough material from sidewalls prior to filing. It is similar to a side edge file guide in construction, but the angle is a whopping 7-degrees.This robust aluminum/composite tool includes a replaceable panzar file that easily removes metal or plastic from sidewalls. Simply make one or two passes down the length of the ski and just enough material will be removed to allow access to the edge material. Replace file if needed with Item #MTK-702P Panzar file | ||
|
|
||
| FK Side wall planer |
Item #MTK-721 $34.95 |
Click Image To Enlarge
|
| The FK model is a smaller, lighter and more basic model that features a combination square/round edge carbide steel cutting blade and easy depth and height adjustments. | ||
|
|
||
| replacement blade |
Item #MTK-3134 : $12.95 |
Click Image To Enlarge
|
|
|
||
| ergo sidewall planer |
Item #SPK-3004 :$44.95 |
|
|
The Ergo model is slightly heftier and has a more ergonomic-shaped body. It includes a much thicker round carbide steel cutting blade...and an optional square carbide cutting blade is also available. The tool allows for easy height and depth cutting adjustments. Ergo sidewall planer | ||
|
|
||
| Replacement round carbide blade |
Item #SPK-5130 : $21.95 |
Click Image To Enlarge
|
|
|
||
| Optional square carbide blade |
Item #SPK-5120 : $21.95 |
Click Image To Enlarge
|